Ask The Trades | |
https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl
DIY Forum >> Carpentry Questions >> cupboard height https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl?num=1116093317 Message started by Chaddy on May 14th, 2005, 6:55pm |
Title: cupboard height Post by Chaddy on May 14th, 2005, 6:55pm Can someone please refresh my memory of the minimum height for kitchen cupboards above a gas hob? ??? |
Title: Re: cupboard height Post by The_Trician on May 14th, 2005, 9:09pm Don't think there should be any cupboards sited over a gas hob! Minimum height for cooker hoods is 750mm if that's any help. TT |
Title: Re: cupboard height Post by jasonB on May 15th, 2005, 8:21am Trician, just looking in my Neff catalogue and they say 550mm electric, 650mm electric between hob & underside of their extractors minimum. The ones that are level with the light pelmet will certainly not be more than this. I have got the details for cupboards somewhere, will have a look. Jason |
Title: Re: cupboard height Post by The_Trician on May 15th, 2005, 1:15pm Sounds like it varies from maufacturer to manufacturer. I go by the size of cooker/hob - 900 or 1000mm gas range cooker says it has to be 750mm. Last one I fitted was an IKEA-branded Baumatic 600mm one, and that said 750mm too! TT |
Title: Re: cupboard height Post by Chaddy on May 15th, 2005, 1:38pm Thanks for the replies. ;D Yeah i believe it does vary from manufacturer to manufacturer, but i was told by a corgi guy the other day that he wouldn't issue a cert unless the cupboards were a specific minimum height and distance sideways from the hob. I think it was 50mm either side and 450 minimum height for the cupboards either side of the hob. But can't remember the corgi "recommended minimum" >:( |
Title: Re: cupboard height Post by CWatters on May 15th, 2005, 3:14pm I'm sure it's in the building regs somewhere but I couldn't find it when I looked just now. This site suggests... http://www.callde.co.uk/safety_regulations.htm Quote: "A Minimum of 750mm Clearance is Required Above a Gas Hob and 650mm Above An Electric Hob To a Cooker Hood. The Gap May Be Reduced To 727mm Above a Gas Hob But The Hood Must Be Cleaned Regularly To Prevent a Fire Hazard. Wall Units Either Side of A Hood Must Be At Least 366mm Above. A Minimum of 300mm Clearance is Required Either Side of The Hob If Installing Next To a Larder Unit or Flammable Material" I believe the usual problem is the use of 60cm wide hoods over 70cm wide 5 ring hobs - which can mean the wall units either side encroach. |
Ask The Trades » Powered by YaBB 2.3! YaBB © 2000-2008. All Rights Reserved. |