Ask The Trades | |
https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl
DIY Forum >> Carpentry Questions >> door hanging https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl?num=1315577714 Message started by sollori on Sep 9th, 2011, 3:15pm |
Title: door hanging Post by sollori on Sep 9th, 2011, 3:15pm Hi,i have to replace my front and back door,simple/ oh no...the old doors and frames are bigger than the doors i have,can i pack the frame out,prob an inch,or do i need to get bigger doors that would be much more expensive..thanks |
Title: Re: door hanging Post by Joiner on Sep 9th, 2011, 3:32pm Yes, you can. I'd make them about 1/4" (or whatever) proud all round and chamfer the edges to make it look as if they were always meant to be that way, so you're effectively making a frame into which to fit the door casing. If you're staining the lot then make sure to use a matching wood. |
Ask The Trades » Powered by YaBB 2.3! YaBB © 2000-2008. All Rights Reserved. |