Ask The Trades
https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl
DIY Forum >> Plumbing Questions >> Vitra toilet seat removal/tighten
https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl?num=1388397168

Message started by Sglin on Dec 30th, 2013, 9:52am

Title: Vitra toilet seat removal/tighten
Post by Sglin on Dec 30th, 2013, 9:52am

How do I remove a Vitra toilet seat to tighten one of the hidden screws under the chrome covers? There are no obvious screws to remove. Just moved into the house so not sure of exact model - it's square with rounded corners. Any help would really be appreciated thanks.

Title: Re: Vitra toilet seat removal/tighten
Post by Lectrician on Dec 30th, 2013, 10:29pm

Any good?

http://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl?num=1372156811

http://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl?num=1348269791


Title: Re: Vitra toilet seat removal/tighten
Post by egginess on Aug 15th, 2015, 12:21pm

I finally figured it out! The vitra soft close toilet seat I have, I couldn't pull it up, and there were no buttons to press to release it upwards.

For my soft close toilet, there are caps on top of the fixings, which you need to PULL out (ie pull sideways towards the middle of the seat). Once you slide off the caps, you can pull upwards on the toilet seat to remove it. Then you can remove the chrome covers, and find the screws underneath the chrome covers.

Ask The Trades » Powered by YaBB 2.3!
YaBB © 2000-2008. All Rights Reserved.