Ask The Trades | |
https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl
DIY Forum >> Plumbing Questions >> Cold supply from tank https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl?num=1514994412 Message started by TrevorP on Jan 3rd, 2018, 3:46pm |
Title: Cold supply from tank Post by TrevorP on Jan 3rd, 2018, 3:46pm We are planning to put a mixer/shower tap on our bath, for guests to use as shower from time to time. We already have a separate cold supply off tank to a separate shower. My question is, is it ok to tee into the separate shower supply for the cold feed to bath mixer tap, or do I need to take another supply from tank purly for the bath mixer? |
Title: Re: Cold supply from tank Post by thescruff on Jan 3rd, 2018, 5:28pm Should be ok to take it from the existing, provided they are both the same pressure/source |
Title: Re: Cold supply from tank Post by TrevorP on Jan 4th, 2018, 9:49am Thanks for that, was not looking forward to draining tank and fitting another supply. Will take your advise, cheers. |
Title: Re: Cold supply from tank Post by Natedog on Jan 6th, 2018, 1:41pm It's not a pumped shower is it? They ideally want their own supply so there isn't a risk of them sucking in air when you open a tap |
Ask The Trades » Powered by YaBB 2.3! YaBB © 2000-2008. All Rights Reserved. |