Ask The Trades | |
https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl
DIY Forum >> Alarms, Phones, Aerials, CCTV & Datacomms >> BT Versatility Help https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl?num=1515498019 Message started by Tina Fisher on Jan 9th, 2018, 11:40am |
Title: BT Versatility Help Post by Tina Fisher on Jan 9th, 2018, 11:40am We have a BT Versatility System, we have one spare extension. I connected this in the hub to a network port but cannot get a dial tone. I have performed a warm reset of the system and not sure where to go from here Can anyone help ? |
Title: Re: BT Versatility Help Post by thescruff on Jan 9th, 2018, 12:45pm Admins favourite topic when he get homes 8-) |
Title: Re: BT Versatility Help Post by Lectrician on Jan 11th, 2018, 5:32pm To a network port? Are you using a normal phone, or a V8 feature phone? A normal phone needs a MASTER socket, connect from the extension terminals in the PBX to 2 and 5 on the MASTER socket. If this doesn't work, check your terminations. Are you using a decent punch down tool? Decent cable? Are the terminals you are punching into in good condition? For a V8 feature phone, it can be a secondary or master socket (master preferred to allow standard phone to be used in place of V8). Extension to 2/5, DATA to 1/6. If nothing, again, check as above. |
Ask The Trades » Powered by YaBB 2.3! YaBB © 2000-2008. All Rights Reserved. |