I hope my cabinets turn out half as good as yours did!
I am making two each of two different style cabinets.
One will be 2m tall 800 x 600mm with fixed glass at the front and doors at the back to gain access.
I am making it in two cubes (one on top of the other) and the top one will have a turntable built into the base.
I have made one of the bottom of the two cubes (all screwed so it can be taken apart and reasembled in the shop) and was thinking of fitting a bead inside the opening, putting the 6mm toughened glass in then fitting another bead to hold it in place. Finally I would fit a trim round the edge to hide everything.
http://echonav.users.btopenworld.com/Jewel/images/Cabinet.JPGThe second unit will be 2m tall 1000x250 and have sliding doors for the front.
I think I will be using the Henderson zenith sliders for this and realise the bottom will need a lot of strength to support the doors. I will be building this unit later in the week so I'll post a photo of that too.
Sean