Ask The Trades

Welcome, Guest. Please Login or Register

	Apr 18^th, 2024, 2:27am
View recently thanked users View top thanked users

Quote: A conclusion is the place where you got tired of thinking.

Ask The Trades › DIY Forum › Building Questions › Cavity

(Moderator: TIMBA-WOLF) - (Moderator Group: Board Moderator)

< Previous Topic | Next Topic >

Pages: 1

Cavity (Read 2382 times)

cupid Junior Member Offline stand&be counted? sod that,lie down no number? Posts: 138 Total Thanks: 0 For This Post: 0 Gender:	Cavity May 31^st, 2004, 9:39pm Can anyone advise me on the best way to close the cavity (wall not mouth) around inside door/windows,before i start plastering ect. many thanks cupid
Back to top	Give me the MEN i will do the job MYSELF!! IP Logged

ROBBO

GDPR opt-out

Total Thanks: 0
For This Post: 0

Re: Cavity
Reply #1 - May 31^st, 2004, 11:06pm

You can buy cavity closers at the builders merchants specifically for this or.....
external brick, 6" vertical D.P.C. 50mm strip of 6" styrofoam and internal blocks cut alternatly i.e full block with brick at reveal to close cavity.. next course cut block at reveal, next corse full block with brick to close cavity - and so on and so forth, Sorry its hard to describe, but check out the cavity closers.

Regards

ROBBO.

IP Logged

cupid Junior Member Offline stand&be counted? sod that,lie down no number? Posts: 138 Total Thanks: 0 For This Post: 0 Gender:	Re: Cavity Reply #2 - Jun 1^st, 2004, 8:59pm Many thanks Robbo I understand what you are saying about block&brick,but all brickwork is built,will have to pop into local b/merchants & check out cavity closers. Thanks again cupid
Back to top	Give me the MEN i will do the job MYSELF!! IP Logged

Pages: 1

(Moderator: TIMBA-WOLF) - (Moderator Group: Board Moderator)

< Previous Topic | Next Topic >

Ask The Trades › DIY Forum › Building Questions › Cavity