TIMBA-WOLF
Board Moderator
Offline
Timba-Wolf..... Var@*sh, should be banned!!
Posts: 7158
Total Thanks: 15For This Post: 0
KENT,(under a tree!!!!) United Kingdom
Gender:
Trade: Joiner
|
Hi jimbocam, and welcome to the forum....
i may be one of the joiners on here , but i prefer TETRION filler, (powder form) as it is easy to use, and most of the painter/decorators i know use it, and will not use any polyfilla/polycell stuff....
no doubt Hammy and/or Cora will be along shortly and either put me straight on what they use or agree with me!!!
but Tetrion is not the best seller in trade circles for nothiong!!
in terms of the filling wood, is it going to be over painted afterwards, as if it is..then either a wood stopper product, such as Liberon is good, or again if painted over you can use tetrion...being a screw hole it will need 2 applications, one to "plug" the hole and allow to set, the second application to fill just proud to allow you to sand down flush!, the same applies to the hinge rebates, but they will need a few applications, or if large enough , i personnaly would fill the rebate with a thin strip of timber glued in place, with the resultant edges filled and sanded smoooth once the wood glue has set on the strip of timber!
hope the above helps!! WOLF!!
|