Ask The Trades - Baxi 105e instant

Welcome, Guest. Please Login or Register

	Apr 20^th, 2024, 5:37am
View recently thanked users View top thanked users

Quote: A verbal contract isn't worth the paper it is written on - Samuel Goldwyn

Ask The Trades › DIY Forum › Plumbing Questions › Baxi 105e instant

(Moderator: thescruff) - (Moderator Group: Board Moderator)

< Previous Topic | Next Topic >

Pages: 1

Baxi 105e instant (Read 2061 times)

bmcc

GDPR opt-out

Baxi 105e instant
Dec 5^th, 2010, 8:47pm

Hi All I have a problem with my Boiler .When i run DWH the radiators get warm, I have done a bit of research and I think the problem is the diverter valve. Has anyone any info on stripping one I had trouble with grit in the smaller valve and also replaced the diaphram, so I would like to try and clean out the diverter valve before going down the line of a complete replacement
Cheers
Bill

IP Logged

thescruff Global Moderator Trade Member Author Offline Who said plumbing was easy. Posts: 6037 Total Thanks: 147 For This Post: 0 Gender: Trade: Plumber	Re: Baxi 105e instant Reply #1 - Dec 6^th, 2010, 12:16am You just take it to bits, remembering where it all goes. If there's grit in the system it should be cleaned/flushed.
Back to top	IP Logged

bmcc GDPR opt-out Total Thanks: 147 For This Post: 0	Re: Baxi 105e instant Reply #2 - Dec 6^th, 2010, 3:59pm Thank you scruff .Will start tomorrow when i have plenty of time. Bill
Back to top	IP Logged

greg GDPR opt-out Total Thanks: 147 For This Post: 0	Re: Baxi 105e instant Reply #3 - Dec 11^th, 2010, 8:02pm I think you can get diaphragm for the 105, no need to change whole valve
Back to top	IP Logged

Pages: 1

(Moderator: thescruff) - (Moderator Group: Board Moderator)

< Previous Topic | Next Topic >

Ask The Trades › DIY Forum › Plumbing Questions › Baxi 105e instant