Ask The Trades - Removing sensor from outside light.

Welcome, Guest. Please Login or Register

	Apr 19^th, 2024, 3:03pm
View recently thanked users View top thanked users

Quote: If at first you don't succeed, destroy all evidence that you tried.

Ask The Trades › DIY Forum › Electrical Questions › Removing sensor from outside light.

(Moderator: Lectrician) - (Moderator Group: Board Moderator)

Pages: 1

Removing sensor from outside light. (Read 1789 times)

Trev56 GDPR opt-out	Removing sensor from outside light. Oct 27^th, 2014, 8:31pm I have just disconnected and removed a sensor which was wired to an external light. Is it ok to join the red to red wires and black to black wires to get the light operating normally. Also there is another bare wire. Does that also need connecting? Any help gratefully received. Thanks
Back to top	IP Logged

Lectrician Administrator Trade Member Author Offline Ask The Trades Posts: 8814 Total Thanks: 109 For This Post: 0 Braunton, North Devon United Kingdom Gender: Trade: Electrician	Re: Removing sensor from outside light. Reply #1 - Oct 28^th, 2014, 6:01am The bare earth wire would also need to be connected, yes. All this would need to be done in a suitable IP rated enclosure.
Back to top	Need to post a picture? Click HERE for info! IP Logged

Pages: 1

(Moderator: Lectrician) - (Moderator Group: Board Moderator)

Ask The Trades › DIY Forum › Electrical Questions › Removing sensor from outside light.