Welcome, Guest. Please Login or Register
Welcome To Ask The Trades!
Mar 29th, 2024, 1:36pm
Quote: They didn't know it was impossible, so they did it - Mark Twain


Page Index Toggle Pages: 1
Send Topic Print
Fixing chipboard floors (Read 1910 times)
JudeP
Newbie
*
Offline

Ask The Trades
Posts: 2


Total Thanks: 0
For This Post: 0



Fixing chipboard floors
Mar 19th, 2015, 8:25pm
 
Hi there

I wonder if anyone can give me some advice.  We recently a bought a house built in the late eighties.  It is well proportioned but some of the essentials and finishing are simply not of the best quality…  One particular problem we have is that the upstairs flooring is made of chipboard, which is ill-fitted.  When anyone walks on it upstairs, the creaking, groaning and thumping is significant!  Not knowing otherwise I tried to mask this with the thickest underlay and the thickest carpet.  However, as you would know, this has not ultimately worked.  I should have fixed the floors first…

My question is: what would be a recommended course of action?  Should I lift everything and how best would the floors be fixed?  What is the chipboard runs under the plasterboard walls and is this likely?  Any other recommendations?

I would be so grateful for your advice!  Many thanks!
Back to top
 
Thank User For This Post  
IP Logged
 
woodsmith
Global Moderator
Trade Member
Author
*****
Offline


Posts: 4395


Total Thanks: 135
For This Post: 1


Gender: male

Trade: Joiner

Re: Fixing chipboard floors
Reply #1 - Mar 20th, 2015, 8:08am
 
This is a common problem and is caused when the joists shrink as they dry out leaving a gap between the chipboard and the joists. There are mastics available now which are applied to the top of the joists and the chipboard is bonded rather than nailed to the joist but this would be a massive job to retrofit.

The best way to fix this problem is to screw the chipboard down with special flooring screws, you can get them from Screwfix or Toolstation, (Floor-Tite is one option). Ordinary screws can jack the floor up and make the problem worse so it's worth using a specialist screw.

The big worry then is to make sure you don't hit a cable or pipe under the floor. Unlike with traditional floorboards you probably won't have any indication where the services are so the safest bet is to pull out the nails and replace them with a screw. This may not be possible especially if the nails are rusted in in which case, once you have determined the direction the joists run, put a screw close to the existing nail (about 20-25mm away).
Back to top
 
Thank User For This Post View members image gallery  
IP Logged
 
JudeP
Newbie
*
Offline

Ask The Trades
Posts: 2


Total Thanks: 0
For This Post: 0



Re: Fixing chipboard floors
Reply #2 - Mar 22nd, 2015, 7:22pm
 
Many thanks for your thoughts and reply - greatly appreciated.
Back to top
 
Thank User For This Post  
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print