Welcome To Ask The Trades!

Quote: I hate being bi-polar...its Brilliant!!!!
  HomeHelpSearchLoginRegisterPM to admin  
 
Page Index Toggle Pages: 1
Send Topic Print
Best way to plane melamine chipboard (Read 1520 times)
woodsmith
Global Moderator
Trade Member
Author
*****
Offline


Posts: 4164
Total Thanks: 78
For This Post: 0


Gender: male

Trade: Joiner

Re: Best way to plane melamine chipboard
Reply #4 - Oct 24th, 2016, 4:10pm
 
The melamine itself is very hard and will quickly ruin a plane blade so, as has been advised, a belt sander is a good way of removing a small amount of material without ruining the melamine edge.
Back to top
 
Thank User For This Post WWW View members image gallery  
IP Logged
 
CWatters
Super Member
*****
Offline

"Daddy fick it" says James

Posts: 5038
Total Thanks: 44
For This Post: 0


Gender: male

Re: Best way to plane melamine chipboard
Reply #3 - Oct 24th, 2016, 9:37am
 
Some of that stuff contains all sorts of junk like bits of wire. Don't use your best plane!
Back to top
 
Thank User For This Post View members image gallery  
IP Logged
 
Natedog
Junior Member
**
Offline

Ask The Trades
Posts: 172
Total Thanks: 1
For This Post: 0


Swindon, United Kingdom
Swindon
United Kingdom


Re: Best way to plane melamine chipboard
Reply #2 - Sep 27th, 2015, 4:10pm
 
Belt sander
Back to top
 
Thank User For This Post View members image gallery  
IP Logged
 
thescruff
Global Moderator
Trade Member
Author
*****
Offline

Who said plumbing was
easy.
Posts: 5764
Total Thanks: 93
For This Post: 0


Gender: male

Trade: Plumber



Re: Best way to plane melamine chipboard
Reply #1 - Aug 23rd, 2015, 11:40am
 
Try a surform or a rasp/course file
Back to top
 
Thank User For This Post View members image gallery  
IP Logged
 
Zac
Junior Member
**
Offline

Ask The Trades
Posts: 8
Total Thanks: 0
For This Post: 0



Best way to plane melamine chipboard
Aug 23rd, 2015, 10:11am
 
I'm using chipboard from an old kitchen unit to box in exposed pipework in my bathroom. My measuring was pretty spot on but then I found that near the floor the wall goes out of true and therefore is not quite perpendicular. I tried to plane the edge of the melamine chipboard to make it fit snug to the wall but it's as hard as hell. Admittedly, the plane I'm using is a cheap one and probably not up the job but is there an easier way to do it? Thanks.
Back to top
 
Thank User For This Post  
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print