smb1973
GDPR opt-out
|
Hi,
I want to fit some lights and a couple of sockets in my garage, which has no power run to it.
I do not plan to run permanent power, as it won't be used that often and it would mean digging up a lot of patio slabs.
My intention is as follows: -
1. Fix a couple of fluorescent ceiling lamps and wire them into a junction box with a switched circuit. 2. Fix a metal box double socket and wire that into the junction box also. 3. Wire a standard 3 in plug into the junction box. 4. On the odd occasion I use the garage, I'll temporarily run an extension lead with RCD into the garage, plug the wired in plug into it, and use the lights and sockets. 5. I'll remove the extension lead when not in use. It will never be left wired up.
So my question is, does Part P apply to this? I'm only running a temporary extension cable, which I know Part P doesn't apply to, but I'm permanently fixing the socket and light switch to the wall and the lights to the ceiling, rather than just plugging lights/tools into the extension lead.
Any advice much appreciated.
|