Ask The Trades - Whirlpool 6th sense washing machine

Welcome, Guest. Please Login or Register

	Apr 19^th, 2024, 7:54am
View recently thanked users View top thanked users

Quote: Earth first! We can strip-mine the other planets later.

Ask The Trades › DIY Forum › Plumbing Questions › Whirlpool 6th sense washing machine

(Moderator: thescruff) - (Moderator Group: Board Moderator)

< Previous Topic | Next Topic >

Pages: 1

Whirlpool 6th sense washing machine (Read 2163 times)

Clivealan Junior Member Offline Ask The Trades Posts: 5 Total Thanks: 0 For This Post: 0	Whirlpool 6th sense washing machine May 17^th, 2018, 8:40pm Just moved the above machine and noticed that through the cycle the Machine pauses and a red tap indicator comes on the control panel As soon as press start it works.. Any ideas Thhanks
Back to top	IP Logged

Natedog

Full Member

Offline

Ask The Trades
Posts: 343

Total Thanks: 9
For This Post: 0

Swindon
United Kingdom

Re: Whirlpool 6th sense washing machine
Reply #1 - May 18^th, 2018, 7:41pm

At a guess it's an incoming water issue. Check you've got the tap turned on. If it definitely is, then try disconnecting the hose from the machine, cleaning or replacing the little gauze strainer that's probably in there and make sure the water runs free when you open the tap (use a bucket to catch the water, obvs) could also be that you've kinked the supply hose

IP Logged

CWatters

Super Member

Offline

"Daddy fick it" says James

Posts: 5150

Total Thanks: 58
For This Post: 0

Gender: male

Re: Whirlpool 6th sense washing machine
Reply #2 - May 31^st, 2018, 2:03pm

Bit late but..

https://www.manualslib.com/manual/421237/Whirlpool-Wwdc-7410.html?page=9#manual

Picture of tap symbol

Quote:

Appliance has no or insufficient water supply. The "Start(Pause)" light blinks.

Check whether:
• Water tap is fully open and water supply pressure is sufficient.
• Kinks are present in the water inlet hose.
• Mesh filter of water inlet hose is blocked (see "Care and Maintenance".
• The water hose is frozen up.
• The safety valve inspection window of your water inlet hose is red (provided your appliance has a water supply hose as shown on picture "D" - see previous chapter "Care And Maintenance"); replace the hose by a new one available through our After-Sales Service or your specialist dealer.

After problem has been removed, restart programme by pressing "Start(Pause)". If the fault occurs again, contact our After-Sales Service (see next chapter).

IP Logged

Pages: 1

(Moderator: thescruff) - (Moderator Group: Board Moderator)

< Previous Topic | Next Topic >

Ask The Trades › DIY Forum › Plumbing Questions › Whirlpool 6th sense washing machine