Ask The Trades | |
https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl
DIY Forum >> Building Questions >> Bricklayers https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl?num=1083703086 Message started by cupid on May 4th, 2004, 9:38pm |
Title: Bricklayers Post by cupid on May 4th, 2004, 9:38pm The brickies start tomorrow :) (weather permitted :-/) on my extention,do they when laying bricks, tie into excisting brickwork: 1,chop out every ?? course? 2,use furfix or simular? 3,other? Any preferance on any above, good/bad? :-/ |
Title: Re: Bricklayers Post by thescruff on May 4th, 2004, 10:33pm should be a set of plans passed which show you the method. scruff |
Title: Re: Bricklayers Post by cupid on May 4th, 2004, 10:51pm Thanks scuff got all plans,b/regs nothing in there :( also looked up spec "nothing" ??? ??? |
Title: Re: Bricklayers Post by thescruff on May 4th, 2004, 11:02pm Has rabbit_rabbit nicked my r again ;D Details should be on drawing submitted to planning office. If the extention is a straight continuation of the existing building then I would expect the bricks to be toothed out to continue the course. If the wall is butting up against the existing then Furfix or toothed, again depending on what happens inside. scRuff |
Title: Re: Bricklayers Post by cupid on May 4th, 2004, 11:07pm opps :-[, sorry SCRUFF wonky pinky,thanks for reply ;) |
Ask The Trades » Powered by YaBB 2.3! YaBB © 2000-2008. All Rights Reserved. |