Ask The Trades
https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl
DIY Forum >> Alarms, Phones, Aerials, CCTV & Datacomms >> BT Veratility Commission System
https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl?num=1427285764

Message started by Andyd358 on Mar 25th, 2015, 12:16pm

Title: BT Veratility Commission System
Post by Andyd358 on Mar 25th, 2015, 12:16pm

Hi Im new here!!

I have an old BT Versatility system that was dead (well wasnt working correctly)  I have flashed the firmware up to 902 which kicked it back into life.  

However I now have the Commission System on the main phone. Ext 20.

I need to edit the xml file so I can remove this.  At present they system is just sat on my desk at work until I can get it all working as it should.  I know this commission System message wont stop it working its more of an annoyance if anything.  

I have read that the XML file can be edited to remove the message so was wondering if anybody could point me to whcih part of the file to edit.

Thanks in advance.


Title: Re: BT Veratility Commission System
Post by Lectrician on Mar 25th, 2015, 3:03pm

With the system connected to a phone line, you can go into the system config and select Commission System.  It just makes a quick call out to the old BT Race system and the message will then vanish.

This is the way I do it for speed.

You can email me the XML to martin@askthetrades.co.uk if you like.

Ask The Trades » Powered by YaBB 2.3!
YaBB © 2000-2008. All Rights Reserved.