Ask The Trades | |
https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl
DIY Forum >> Electrical Questions >> Changing downlights to LED https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl?num=1452432985 Message started by tombarnes52 on Jan 10th, 2016, 1:36pm |
Title: Changing downlights to LED Post by tombarnes52 on Jan 10th, 2016, 1:36pm Hi, Hope someone can help I am changing my halogen ceiling downlights to LED. The size of the hole is 72mm but most LED downlights seem to say the cut out hole should be 56mm diameter. The diameter of the light (external part) is 86mm. Can i use these or do I have to use a downlight with a 72mm cut out. Thanks for help. Tom |
Title: Re: Changing downlights to LED Post by Lectrician on Jan 10th, 2016, 6:16pm 72-74 is the standard cutout. I would highly recommend looking at JCC LED6 and LED10 downlights. They would fit your hole, and comparable in brightness and come with a manufacturers 10 year warranty! They are the defacto! |
Ask The Trades » Powered by YaBB 2.3! YaBB © 2000-2008. All Rights Reserved. |