Ask The Trades | |
https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl
DIY Forum >> Electrical Questions >> Oven Circuit https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl?num=1467710709 Message started by ckelly0172 on Jul 5th, 2016, 10:25am |
Title: Oven Circuit Post by ckelly0172 on Jul 5th, 2016, 10:25am Advise please..... I'm installing 1 oven 3.4kW and Micro combi oven 3.65kW, am I ok to wire them both to a 6mm fed connection plate which is isolated at a cooker switch, which is fed by a 6mm feed from the CU. Cables are less than 50mm deep. Many thanks Craig |
Title: Re: Oven Circuit Post by baz on Jul 5th, 2016, 11:10am Yes! You will be best to use a Dual Appliance Connector to replace the existing CCU. Like this https://www.tlc-direct.co.uk/Products/AA45DCOP.html |
Title: Re: Oven Circuit Post by ckelly0172 on Jul 6th, 2016, 11:43am Thanks Baz, appreciated. Cheers |
Ask The Trades » Powered by YaBB 2.3! YaBB © 2000-2008. All Rights Reserved. |