Ask The Trades | |
https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl
DIY Forum >> Electrical Questions >> Instaling a 3 phase 6 pole motor to run a 4kw PMG. https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl?num=1487409529 Message started by Swaleyp on Feb 18th, 2017, 9:18am |
Title: Instaling a 3 phase 6 pole motor to run a 4kw PMG. Post by Swaleyp on Feb 18th, 2017, 9:18am Hello, I have obtained a 3 phase motor that I need to cable up to the mains. The setup of L1, 2 & 3 is a little confusing. However, I have worked out the requirement for 240V. I need to know how i install live, neutal and earth wires, can I power the motor from a standard house socket.. Cheers Pete |
Title: Re: Instaling a 3 phase 6 pole motor to run a 4kw PMG. Post by Lectrician on Feb 18th, 2017, 10:16am You cannot connect a three phase motor to a standard 230/240v supply. The windings can be configured for a 400 or 230v supply, but both need to be three phase supplies. The only way you can connect a three phase motor to a single phase supply is to use an inverter - and this usually works out more expensive than purchasing a new motor! |
Title: Re: Instaling a 3 phase 6 pole motor to run a 4kw PMG. Post by Swaleyp on Feb 18th, 2017, 12:35pm OK, thanks. Will exchange this for a single phase.. |
Title: Re: Instaling a 3 phase 6 pole motor to run a 4kw PMG. Post by CWatters on Mar 14th, 2017, 8:22am What's a PMG? |
Ask The Trades » Powered by YaBB 2.3! YaBB © 2000-2008. All Rights Reserved. |