Ask The Trades | |
https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl
DIY Forum >> Plumbing Questions >> Plumbing problem https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl?num=1519584587 Message started by Goodwin on Feb 25th, 2018, 6:49pm |
Title: Plumbing problem Post by Goodwin on Feb 25th, 2018, 6:49pm Fitting a new bath. The waste outlet is too low to allow a run to the waste pipe. Would a shallow bath trap or an extended body bath trap help by creating a run. Otherwise it looks like I will have to bore the outside wall to make a lower waste pipe . |
Title: Re: Plumbing problem Post by thescruff on Feb 26th, 2018, 12:10pm If the pipe is higher than the base of the bath water will not completely drain. Two solutions, raise the bath or drill a new hole. |
Ask The Trades » Powered by YaBB 2.3! YaBB © 2000-2008. All Rights Reserved. |