Ask The Trades | |
https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl
DIY Forum >> Plumbing Questions >> Whirlpool 6th sense washing machine https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl?num=1526586022 Message started by Clivealan on May 17th, 2018, 8:40pm |
Title: Whirlpool 6th sense washing machine Post by Clivealan on May 17th, 2018, 8:40pm Just moved the above machine and noticed that through the cycle the Machine pauses and a red tap indicator comes on the control panel As soon as press start it works.. Any ideas Thhanks |
Title: Re: Whirlpool 6th sense washing machine Post by Natedog on May 18th, 2018, 7:41pm At a guess it's an incoming water issue. Check you've got the tap turned on. If it definitely is, then try disconnecting the hose from the machine, cleaning or replacing the little gauze strainer that's probably in there and make sure the water runs free when you open the tap (use a bucket to catch the water, obvs) could also be that you've kinked the supply hose |
Title: Re: Whirlpool 6th sense washing machine Post by CWatters on May 31st, 2018, 2:03pm Bit late but.. https://www.manualslib.com/manual/421237/Whirlpool-Wwdc-7410.html?page=9#manual Picture of tap symbol Quote:
|
Ask The Trades » Powered by YaBB 2.3! YaBB © 2000-2008. All Rights Reserved. |