Ask The Trades | |
https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl
DIY Forum >> Alarms, Phones, Aerials, CCTV & Datacomms >> Removing PIR https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl?num=1534350478 Message started by wozzy on Aug 15th, 2018, 5:27pm |
Title: Removing PIR Post by wozzy on Aug 15th, 2018, 5:27pm Well not exactly removing i just dont want it to trigger a alarm as im intending on leaving a cat in the room, and i have little knowledge of these systems. Its a menvier panel and i have the user code and nothing else, besides some installation record. the Zone on the paperwork is end of line does that mean i cant just chuck both alarm (if thats what you call them) in a NC terminal at the detector? |
Title: Re: Removing PIR Post by Lectrician on Aug 15th, 2018, 9:11pm Even if it is end of line wiring, just leave everything in the same terminals but add a link across the NC contacts in the PIR. |
Title: Re: Removing PIR Post by CWatters on Aug 19th, 2018, 6:52pm If it's temporary perhaps you could just cover the PIR sensor with something opaque to IR. Tin foil perhaps? |
Ask The Trades » Powered by YaBB 2.3! YaBB © 2000-2008. All Rights Reserved. |