Ask The Trades
https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl
DIY Forum >> Plumbing Questions >> Amateur plumbing
https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl?num=1536089892

Message started by wozzy on Sep 4th, 2018, 8:38pm

Title: Amateur plumbing
Post by wozzy on Sep 4th, 2018, 8:38pm

[gallery fullsize]wozzy/1536089815.jpg[/gallery]

[gallery fullsize]wozzy/1536089835.jpg[/gallery]

As im on paternity leave so have the time (and no overtime money) on my hands i thought i would give this bit a try.  Have a look at the pictures it may look the best but will it do? Any obvious mistakes? Been turned on a day so far and no problems, been isolating when out the house.  


Title: Re: Amateur plumbing
Post by wozzy on Sep 4th, 2018, 8:39pm

Just to add im adding more clips when i get hold of some tomorrow hopefully.

Title: Re: Amateur plumbing
Post by thescruff on Sep 5th, 2018, 8:51am

Seen worse by a long way. If it works it will do.

Place the valve on a carpet tile or similar to stop any vibration noises before you screw it to the floor.


Title: Re: Amateur plumbing
Post by londonman on Sep 10th, 2018, 7:16am

And proper bent pipes, to boot  ;)

Ask The Trades » Powered by YaBB 2.3!
YaBB © 2000-2008. All Rights Reserved.