Ask The Trades - Salamander 1.5bar pump

Welcome, Guest. Please Login or Register

	Apr 19^th, 2024, 6:20am
View recently thanked users View top thanked users

Quote: A conclusion is the place where you got tired of thinking.

Ask The Trades › DIY Forum › Plumbing Questions › Salamander 1.5bar pump

(Moderator: thescruff) - (Moderator Group: Board Moderator)

< Previous Topic | Next Topic >

Pages: 1

Salamander 1.5bar pump (Read 1914 times)

Chaddy

GDPR opt-out

Salamander 1.5bar pump
Nov 17^th, 2004, 9:57pm

I recently installed a salamnder 1.5bar pump.
I used a warix fitting on the tank.
The problem i've got is that it sounds like it has air in the pump( a kind of whoosing noise! ) and when the hot tap is turned on and off quicklyanywhere else in the house the pump runs momentarily.
Any ideas?? I've tried bleeding the pump on numerous occasions but it doesn't seem to make any difference.

IP Logged

thescruff Global Moderator Trade Member Author Offline Who said plumbing was easy. Posts: 6037 Total Thanks: 147 For This Post: 0 Gender: Trade: Plumber	Re: Salamander 1.5bar pump Reply #1 - Nov 17^th, 2004, 10:27pm could be lots of things including the warex flange. Pump has a pressure switch which will switch the pump on whenever the pressure goes down, the reason you shouldn't connect a pump to a wc, it will keep shunting on and off. do a drawing and email it to me , and i can have a look while on me holidays. scruff
Back to top	IP Logged

Pages: 1

(Moderator: thescruff) - (Moderator Group: Board Moderator)

< Previous Topic | Next Topic >

Ask The Trades › DIY Forum › Plumbing Questions › Salamander 1.5bar pump