Welcome, Guest. Please Login or Register
Welcome To Ask The Trades!
Jun 10th, 2026, 1:13am
Quote: If you want the rainbow, you got to put up with the rain.


Ask The Trades › DIY Forum › Building Questions › Dot and Dab
(Moderator: TIMBA-WOLF) - (Moderator Group: Board Moderator) < Previous Topic | Next Topic >
Page Index Toggle Pages: 1
Send Topic Print
Dot and Dab (Read 1188 times)
jimcam
GDPR opt-out
Dot and Dab
Sep 23rd, 2008, 11:37am  
I need to get some board onto the bare-brick walls of a bathroom before doing a bathroom re-fit.

I'm a dot and dab virgin and was wondering the best way of doing it.  Huh

Do I get a lower board on first, stick it square and plumb and prop it off the floor, then measure, cut and stick some board to meet the ceiling boards?

How long does the adhesive take to grip and go off?
Back to top
 
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print
(Moderator: TIMBA-WOLF) - (Moderator Group: Board Moderator) < Previous Topic | Next Topic >
Ask The Trades › DIY Forum › Building Questions › Dot and Dab

Ask The Trades » Powered by YaBB 2.3!
YaBB © 2000-2008. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge