TIMBA-WOLF
Board Moderator
Offline
Timba-Wolf..... Var@*sh, should be banned!!
Posts: 7158
Total Thanks: 15For This Post: 0
KENT,(under a tree!!!!) United Kingdom
Gender:
Trade: Joiner
|
The correct foam for siding is called fan fold insulation. It is styrofoam insulation and less then 1/4" thick. When using this, your new siding should come out correctly on your brick mold!
unless of course you are talking about the following type of siding to replace the timber siding,
GRAND SIERRA SERIES: Grand Sierra is a 0.48 thickness vinyl siding that along witha 3/8" foam core applied backing
and CW, not it is not his intention, its across the pond codes of practice here, (U.S/Canada)
probably has either 2 x 4 or 2 x 6 studs, followed up with the B.M and then the siding.....
the fan fold acts as the stop against the cold bridging....
[note: use of U.S size denotations and spellings]
|