Andycdufc1983
GDPR opt-out
|
I was helping my friend fix her normal supply to her immersion heater. Her emergency supply works and I've checked the heating element which also works. The fused spur the normal supply was fitted to was in a very bad state the fuse itself had burned out to the point the fuse was gone, the inside of the spur had split and had obvious burn marks. I changed the spur for a new one and turned on power (after fixing water issue), and got nothing I checked 240 from supply side and had no reading at all double checked all the breakers on the board and even reset the rcd just incase nothing at all. I believe she has had water damage and that's what blew the spur, could the water have damaged the twin and earth to the main board? Many thanks.
|