woodsmith
|
Both Plasplugs and Fischer make specific plugs for thermalite, ordinary plugs are useless in these blocks as you say. You can sometimes get away with using 100mm frame fixings, which are easy to use when fitting studding, but you need to be really careful not to tighten them up to much. If you are still having problems you can glue plugs in with styrene free resin, comes in a cartridge, is easy to use and sets like rock but you need to have all the holes drilled and ready. Squirt resin in the hole, push in a plug, move on to the next quick sharp as the resin will set in the nozzle in just a few minutes.
|