I've recently installed (for the first time) a Velux window close to the ridge of my loft, but now need to add one close to the lower end of the roof.  Knowing how it's done, I'm guessing I need to remove all tiles above the new opening, right up to the ridge, in order to re-tile from the window upwards?  Can't think of a another way to fix the few removed tiles above the new window without doing so??  I have 300x600 synthetic slate tiles, fixed around half way up each.
Any suggestions welcome.
Thanks
Lee

On the sides use individual soakers with a minimum 150mm under each slate and ideally a secret gutter

Should find how too in the book.

https://www.associatedlead.co.uk/wp-content/uploads/2018/06/Guide-to-Rolled-Lead...

thescruff wrote on Feb 11^th, 2019, 8:24am:


When you buy a roof window you need to also buy a flashing kit specifically designed for the type of roofing slate/ tile etc, these come with more or less everything you need to fit the window.