Welcome, Guest. Please Login or Register
Welcome To Ask The Trades!
Dec 14th, 2024, 5:28pm
Quote: I almost had a psychic girlfriend, ..... but she left me before we met.


Pages: 1 2 
Send Topic Print
Hot water tank platform (Read 16470 times)
Natedog
Full Member
***
Offline

Ask The Trades
Posts: 347


Total Thanks: 9
For This Post: 0


Swindon, United Kingdom
Swindon
United Kingdom


Re: Hot water tank platform
Reply #17 - Jan 25th, 2021, 4:53pm
 


it's not so easy to see which pipes go where, and it's kinda tight for taking a decent pic, so i've marked up the pipes as best as i can below

Image 16

red - from boiler
blue - return to boiler
purple - to radiators
yellow - 15mm from header tank
white - vent pipe

the vent tees off the pipe from the boiler under the floor
the fill from the tank joins the same pipe just in front of the pump

new years eve 2019 the pump failed, and nowhere was open who had a matching pump (standard old grundfos thing) so it was swapped for this posh one that maintains constant pressure, speeding up or slowing down as the TRVs open and close.

I don't know if it's relevant or not, but when the cylinder was changed about 10 years ago, the pipework coming from the syslinder was slightly modified.  originally the blue pipe coming from the cylinder was reduced down to 15mm for about 8 inches, then back to 22.  i had to cut the pipes to get the cylinder out, and it was replaced with 22 as that's all I had

don't know if it's related, but when the boiler is on doing hot water only, the landing and bathroom radiators get slightly warm, but the water is flowing the wrong way (lockshield end gets warm first, not the TRV end as it does when the heating is on.

At some point in the near future, the whole lot will be being ripped out again, as i want to fit a solar hot water system as well, so will need to put a twin coil cylinder in
Back to top
 
Thank User For This Post WWW View members image gallery  
IP Logged
 
thescruff
Global Moderator
Trade Member
Author
*****
Offline

Who said plumbing was
easy.
Posts: 6037


Total Thanks: 147
For This Post: 1


Gender: male

Trade: Plumber



Re: Hot water tank platform
Reply #18 - Jan 26th, 2021, 10:15am
 
You're obviously getting a backflow which doesn't help but difficult to see from the pic.

The only thing I note is the cold feed and vent connection should be as close as possible with nothing between them.

Any chance of a simple line drawing showing the boiler flow and return and any connections
Back to top
 
Thank User For This Post View members image gallery  
IP Logged
 
Natedog
Full Member
***
Offline

Ask The Trades
Posts: 347


Total Thanks: 9
For This Post: 0


Swindon, United Kingdom
Swindon
United Kingdom


Re: Hot water tank platform
Reply #19 - Jan 26th, 2021, 9:27pm
 
Image 17

I think that there may be more than 1 return connection for the rads which is causing the back flow when its on hot water only, but that will be under the floor somewhere

Fill is closest to the pump, probably about 3 inches from it.  The vent is gonna be another 8 inch past that at a guess.  

Pump is a grundfos ups3 15-50/65 130

The valve (tower mid position valve) is getting tired and makes some odd noises when it switches on

https://youtu.be/jTiJsEHCQnU

First putting it on heating only, then the screaming noise is it going to hot water only
Back to top
 
Thank User For This Post WWW View members image gallery  
IP Logged
 
thescruff
Global Moderator
Trade Member
Author
*****
Offline

Who said plumbing was
easy.
Posts: 6037


Total Thanks: 147
For This Post: 1


Gender: male

Trade: Plumber



Re: Hot water tank platform
Reply #20 - Jan 27th, 2021, 9:54am
 
Looks good actually, the connection for the cold feed and vent should be as close as possible if I was being picky.

The 3port may be leaking heat into a couple of rads if it's worn but that wouldn't reverse the circulation so, as you say a wrong connection under the floor.
Back to top
 
Thank User For This Post View members image gallery  
IP Logged
 
Natedog
Full Member
***
Offline

Ask The Trades
Posts: 347


Total Thanks: 9
For This Post: 0


Swindon, United Kingdom
Swindon
United Kingdom


Re: Hot water tank platform
Reply #21 - Jan 27th, 2021, 11:38am
 
If its not a daft question, why isn't the fill and vent done as 1 pipe?
Back to top
 
Thank User For This Post WWW View members image gallery  
IP Logged
 
thescruff
Global Moderator
Trade Member
Author
*****
Offline

Who said plumbing was
easy.
Posts: 6037


Total Thanks: 147
For This Post: 1


Gender: male

Trade: Plumber



Re: Hot water tank platform
Reply #22 - Jan 27th, 2021, 2:04pm
 
Used to be frowned upon by British gas in the good old days.

Nowadays it's done for low head systems but it makes filling a pain in most cases
Back to top
 
Thank User For This Post View members image gallery  
IP Logged
 
Natedog
Full Member
***
Offline

Ask The Trades
Posts: 347


Total Thanks: 9
For This Post: 0


Swindon, United Kingdom
Swindon
United Kingdom


Re: Hot water tank platform
Reply #23 - Jan 27th, 2021, 2:51pm
 
Filling ours is a pain anyway.  I can still hear air moving about somewhere after a week
Back to top
 
Thank User For This Post WWW View members image gallery  
IP Logged
 
thescruff
Global Moderator
Trade Member
Author
*****
Offline

Who said plumbing was
easy.
Posts: 6037


Total Thanks: 147
For This Post: 2


Gender: male

Trade: Plumber



Re: Hot water tank platform
Reply #24 - Jan 27th, 2021, 7:43pm
 
There should be an air vent at the highest point where the flow leaves the cylinder, I assumed it was out of frame.
Back to top
 
Thank User For This Post View members image gallery  
IP Logged
 
Natedog
Full Member
***
Offline

Ask The Trades
Posts: 347


Total Thanks: 9
For This Post: 0


Swindon, United Kingdom
Swindon
United Kingdom


Re: Hot water tank platform
Reply #25 - Jan 29th, 2021, 10:51pm
 
There is an air vent pipe on the pump side of the cylinder.  Its the pipe you can see sticking up in the first pic, with the compression fitting on it.  

We were having problems with air getting in to the system, so I extended the pipe with the vent on, so it would be able to collect more air and not need bleeding every single day.  It has since been traved and sorted (pin holes in a rad, replaced rad and it stopped) so could really be shortened again.  I just haven't got round to it
Back to top
 
Thank User For This Post WWW View members image gallery  
IP Logged
 
thescruff
Global Moderator
Trade Member
Author
*****
Offline

Who said plumbing was
easy.
Posts: 6037


Total Thanks: 147
For This Post: 0


Gender: male

Trade: Plumber



Re: Hot water tank platform
Reply #26 - Jan 30th, 2021, 12:19pm
 
Don't shorten it.

Better still hole a glass of water under the vent pipe and get someone to turn the boiler on. with and without the heating on.

Does it suck the water out of the glass?
Back to top
 
Thank User For This Post View members image gallery  
IP Logged
 
Natedog
Full Member
***
Offline

Ask The Trades
Posts: 347


Total Thanks: 9
For This Post: 0


Swindon, United Kingdom
Swindon
United Kingdom


Re: Hot water tank platform
Reply #27 - Jan 31st, 2021, 10:12am
 
I should have called that an air bleed, not an air vent.  Sorry!  The air in the system problem went away after replacing a couple of pinholed rads and replacing some elderly TRVs

I'll try the glass under the vent next weekend.  Won't have time before I'm back to work later today
Back to top
 
Thank User For This Post WWW View members image gallery  
IP Logged
 
thescruff
Global Moderator
Trade Member
Author
*****
Offline

Who said plumbing was
easy.
Posts: 6037


Total Thanks: 147
For This Post: 0


Gender: male

Trade: Plumber



Re: Hot water tank platform
Reply #28 - Jan 31st, 2021, 10:52am
 
The air could be caused by corrosion if you have a couple of rads pinholeing, , in which case after you have finished the work make sure you put an inhibitor in the system.

Check behind the radiators with a mirror to make sure there's no serious corrosion on the bottoms of the rads first.
Back to top
 
Thank User For This Post View members image gallery  
IP Logged
 
Natedog
Full Member
***
Offline

Ask The Trades
Posts: 347


Total Thanks: 9
For This Post: 0


Swindon, United Kingdom
Swindon
United Kingdom


Re: Hot water tank platform
Reply #29 - Jan 31st, 2021, 12:20pm
 
when the heating was installed, her ex-husband did it on the cheap.  there was a handful of rads that were 2nd hand as they were "the right price" (presumably free)  i've replaced 8 out of the 11 rads over the last few years as i've been decorating.  i hate brush painted rads, so the ones that were looking scruffy just got changed.  they're cheap enough that i don't think it's worth the hassle of removing them to spray them.  

and yes, one i had run the cleaner through and flushed the system out a few times, it did get refilled with 2 bottles of F1 in it
Back to top
 
Thank User For This Post WWW View members image gallery  
IP Logged
 
thescruff
Global Moderator
Trade Member
Author
*****
Offline

Who said plumbing was
easy.
Posts: 6037


Total Thanks: 147
For This Post: 0


Gender: male

Trade: Plumber



Re: Hot water tank platform
Reply #30 - Jan 31st, 2021, 9:54pm
 
toolstation radiator are cheap as chips at the moment.

Recently got 9 48 x 24 double panel with fins for around £56.00 including valves
Back to top
 
Thank User For This Post View members image gallery  
IP Logged
 
Natedog
Full Member
***
Offline

Ask The Trades
Posts: 347


Total Thanks: 9
For This Post: 0


Swindon, United Kingdom
Swindon
United Kingdom


Re: Hot water tank platform
Reply #31 - Jan 31st, 2021, 11:18pm
 
I get whatever the closest size is in their clearance range.  The landing radiator got replaced with a 500x1800 single panel which cost me £18. For that money I wasn't worried about modifying the pipework a bit
Back to top
 
Thank User For This Post WWW View members image gallery  
IP Logged
 
thescruff
Global Moderator
Trade Member
Author
*****
Offline

Who said plumbing was
easy.
Posts: 6037


Total Thanks: 147
For This Post: 0


Gender: male

Trade: Plumber



Re: Hot water tank platform
Reply #32 - Feb 1st, 2021, 9:18am
 
Good price.

Has Danny contacted you?
Back to top
 
Thank User For This Post View members image gallery  
IP Logged
 
Natedog
Full Member
***
Offline

Ask The Trades
Posts: 347


Total Thanks: 9
For This Post: 0


Swindon, United Kingdom
Swindon
United Kingdom


Re: Hot water tank platform
Reply #33 - Feb 1st, 2021, 11:39am
 
Yes thanks  Grin
Back to top
 
Thank User For This Post WWW View members image gallery  
IP Logged
 
Pages: 1 2 
Send Topic Print