Ask The Trades - Print Page

Ask The Trades
https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl DIY Forum >> Plumbing Questions >> flanged studding fittings................. https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl?num=1171005124 Message started by greenstratman on Feb 9^th, 2007, 7:12am

Title: flanged studding fittings.................
Post by greenstratman on Feb 9^th, 2007, 7:12am

Hi

What do we call those fittings that are screwed to a wall, that has a threaded boss on the centre. Used to attach steel pipe work to walls/ceilings.

More specifically what do plumbcentre call them??

Cheers

Title: Re: flanged studding fittings.................
Post by thescruff on Feb 9^th, 2007, 5:55pm

Brass Male plates. which the munson rings screw directly on.

Brass female plates. which you use an m10 studding at various lengths.

Black or galvanised back plates in M10, m12 or m15, depending on the pipe ring, again the studding can be cut to the required length.

plumbcenter would only have the brassones if you're lucky.