| Ask The Trades | |
|
https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl
DIY Forum >> Carpentry Questions >> mitrered corners https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl?num=1172601071 Message started by numbnutz on Feb 27th, 2007, 6:31pm |
|
|
Title: mitrered corners Post by numbnutz on Feb 27th, 2007, 6:31pm do u have to clamp up 45degree mitres on 40 mm hardwood worktops or is there a alternative ? |
|
Title: Re: mitrered corners Post by Scrit on Feb 27th, 2007, 7:15pm Solid wood worktops are probably best butt jointed together with standard "figure 8" worktop connector bolts to hold them together. Does your worktop have a profiled (rounded) edge? Scrit |
|
Title: Re: mitrered corners Post by numbnutz on Feb 27th, 2007, 7:29pm hey no its a 40 mm square edge |
|
Title: Re: mitrered corners Post by Scrit on Feb 28th, 2007, 1:50pm wrote on Feb 27th, 2007, 7:29pm:
The just butt joint with a bead of silicone in the joint. The workjtop joiners will actually allow a small amount of movement for expansion and contraction Scrit |
|
Ask The Trades » Powered by YaBB 2.3! YaBB © 2000-2008. All Rights Reserved. |