Ask The Trades - Print Page

Ask The Trades
https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl DIY Forum >> Carpentry Questions >> Kitchen unit hinges https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl?num=1260107279 Message started by greg on Dec 6^th, 2009, 1:47pm

Title: Kitchen unit hinges
Post by greg on Dec 6^th, 2009, 1:47pm

What is the standard distance from the edge of the carcass and door to the center point of the kitchen unit door hinges?

Thanks

Title: Re: Kitchen unit hinges
Post by Joiner on Dec 6^th, 2009, 5:21pm

Can depend on the thickness of the carcase and 'diameter' of the hinge.

Title: Re: Kitchen unit hinges
Post by woodsmith on Dec 6^th, 2009, 7:19pm

Here is a link to Hafele which gives you the sort of standard dimensions, but as Joiner said there are a lot of variables;

http://www.hafele.co.uk/Hafele35a1/images/External/pages/FF07_3-99J.PDF

Title: Re: Kitchen unit hinges
Post by greg on Dec 7^th, 2009, 6:43am

Thanks guys