Ask The Trades
https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl
DIY Forum >> Plumbing Questions >> Riello Mectron burner
https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl?num=1286469163

Message started by geoff1 on Oct 7th, 2010, 5:32pm

Title: Riello Mectron burner
Post by geoff1 on Oct 7th, 2010, 5:32pm

How / what do I need to do to change the jet on a mectron 5M burner,
I have the jet but am not sure how to proceed with the replacement.

Title: Re: Riello Mectron burner
Post by thescruff on Oct 7th, 2010, 6:48pm

You take the thrust tube off and unscrew it, taking care with the electrodes.

Title: Re: Riello Mectron burner
Post by geoff1 on Oct 8th, 2010, 8:13am

Hi, Thanks for that, do I need to take the control box off the burner to
release the thrust tube from the top, I can see and release the screws
which secure it at the 'sharp end' but it seems to be fixed by a adjustable slider mechanism up near the electrodes.

Title: Re: Riello Mectron burner
Post by thescruff on Oct 8th, 2010, 6:13pm

Probably best to ignor what I wrote first time  :-[

this is for the 3m so yes you take the control box off and slide the parts out.

A) Determine the proper firing rate for the boiler/furnace unit, then use Table B, page 9, to select proper nozzle size for the burner.
B) Remove the nozzle adapter, 2, from the drawer assembly by loosening screw, 1.
C) Insert the proper nozzle into the nozzle adapter, tighten securely.
D) Replace adapter, with nozzle installed, into drawer assembly and secure with screw,1


INSERTION OF DRAWER ASSEMBLY (see figure 13)
A) Loosen the screw 3, then unplug the control box. 4. by pulling it up and back at the same time.
B) Remove the air tube cover plate. 5, by loosening the retaining screw. 6.
C) Slide the complete drawer assembly into the combustion head. as shown. and secure it in place with screw, 7. Attach the fuel line to the pump.
E) Replace the air tube cover plate. 5. and carefully plug in the control box. 4. reversing step A.
D) Securely tighten all screws.

Ask The Trades » Powered by YaBB 2.3!
YaBB © 2000-2008. All Rights Reserved.