Ask The Trades - Print Page

Ask The Trades
https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl DIY Forum >> Plumbing Questions >> Fitting bath taps. https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl?num=1320962040 Message started by oldguy on Nov 10^th, 2011, 9:54pm

Title: Fitting bath taps.
Post by oldguy on Nov 10^th, 2011, 9:54pm

I'm fitting new taps in my bathroom. Can I use flexible tap connectors on hot and cold taps? It is the first time I've thought of using them.
Hope you can help.

Title: Re: Fitting bath taps.
Post by cumbriahandyman on Nov 10^th, 2011, 9:56pm

Yes, not a problem.

Title: Re: Fitting bath taps.
Post by CWatters on Nov 11^th, 2011, 7:27am

Flexible tap connectors typically have a smaller internar diameter than a copper pipe. This can sometimes be a problem if you have a gravity system (reduced flow rate). Not usually a problem for a mains pressure system.