Ask The Trades - Print Page

Ask The Trades
https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl DIY Forum >> Plumbing Questions >> Noken Imagine Deck Mounted Valves https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl?num=1394559030 Message started by nd on Mar 11^th, 2014, 5:30pm

Title: Noken Imagine Deck Mounted Valves
Post by nd on Mar 11^th, 2014, 5:30pm

Hi everyone. Has anyone come across these Noken imagine deck mounted valves & bath overflow/filler???
I have one with no instructions & Porcelanosa are no help. I though they'd be easy to fit & pipe up, i was wrong. Maybe i'm just missing something obvious. If anyone can help i'd appreciate it.
The valves have a side & bottom fitting. Both are 1/2" bsp.
Filler/overflow has smaller male fittings (i think 10mm) one side has a blanking plug.
I'm struggling with the piping & the fitting of the valves to the bath. Apart from that alls well.
Cheers
Neil

Title: Re: Noken Imagine Deck Mounted Valves
Post by thescruff on Mar 11^th, 2014, 10:28pm

A pic may help

Title: Re: Noken Imagine Deck Mounted Valves
Post by CWatters on Mar 18^th, 2014, 7:26am

Not much on the Noken web site..

http://www.noken.eu/catalogo/list-ser.php?idi=gb&pro=0&ser=IMAGINE-N&uso=lavabo&mer=INT

Doesn't look too difficult based on the drawings for the basin taps. Looks like each tap has an in and an out and you need to use a T joint to mix the outputs to send to the spout. The drawing for the bath spout isn't clear.