Ask The Trades | |
https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl
DIY Forum >> Carpentry Questions >> 3 way joint https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl?num=1090865004 Message started by greg on Jul 26th, 2004, 7:03pm |
Title: 3 way joint Post by greg on Jul 26th, 2004, 7:03pm How would you do a 3 point joint, ie 2 pieces coming together at 90 degrees and a third running at 90 degrees to the other two pieces |
Title: Re: 3 way joint Post by big_all on Jul 26th, 2004, 7:35pm do you mean like a leg ??? ??? if so you cut your mortices from both angles to to meet inside the leg and you fit the tennons and 45 degree mitre where they meet inside the the leg big all |
Title: Re: 3 way joint Post by Dewy on Jul 26th, 2004, 7:40pm 1: mortice and tenon 2: haunched mortice and tenon 3: haunced mitred mortice and tennon 4: staggered dowels All depending on where the 3 way joints are and what they are for |
Title: Re: 3 way joint Post by pk on Jul 27th, 2004, 5:39pm depends what its for , there is an evil chinese woodworking joint for cabinets that comprises a secret mitred dovetail with a through wedged tenon on the vertical section......wouldn't ya just love to cut one for fun!!!!! |
Title: Re: 3 way joint Post by jasonB on Jul 27th, 2004, 6:00pm I,ve got a step by step guide in an old copy of Fine Woodworking, send me your e-mail in a private message if you want a scan. Jason |
Title: Re: 3 way joint Post by pk on Jul 27th, 2004, 9:27pm No thanks...I learn't my lesson at college when, despite the tutors advice, I selected an angled mitred through dovetail ( essentially a compound dovetail) on a four sided tray in walnut. Managed it in the end but it took far to many trial joints |
Title: Re: 3 way joint Post by passy_kit on Jun 6th, 2005, 1:04pm Is he she meaning a showcase joint? PAASSY |
Ask The Trades » Powered by YaBB 2.3! YaBB © 2000-2008. All Rights Reserved. |