Ask The Trades | |
https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl
DIY Forum >> Building Questions >> tiled roof https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl?num=1097850177 Message started by yozman on Oct 15th, 2004, 3:22pm |
Title: tiled roof Post by yozman on Oct 15th, 2004, 3:22pm building garage extension and was thinking of tiling roof myself (double romans) the roof is going to be a mono pitched to side of house (lean to) looked into regs etc and methods and looks pretty straight forward any pitfalls,tips or advice would be welcomed ;D |
Title: Re: tiled roof Post by Robbo on Oct 15th, 2004, 7:22pm Set your first lath so there is a two inch overhang of the tile into the gutter then lay out a course of tile so that the overhang is equal on both sides for the fillett bedded onto a fibre cement strip. Set your laths at twelve inches or as near as this will allow if you consider the top lath needs to take the final course of tile with mabe only an inch from head of top tile to wall so there is no cutting and the lead will cover the head fully. (may need to lessen or increase the gauge slightly to accomodate this) Then tile away .. nail the first two courses and two tiles in from each gable, then every third or fourth course thereafter. Good luck Regards Robbo. |
Ask The Trades » Powered by YaBB 2.3! YaBB © 2000-2008. All Rights Reserved. |