Ask The Trades | |
https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl
DIY Forum >> Alarms, Phones, Aerials, CCTV & Datacomms >> S Video https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl?num=1102097095 Message started by Lectrician on Dec 3rd, 2004, 6:04pm |
Title: S Video Post by Lectrician on Dec 3rd, 2004, 6:04pm Anyone know if you can get (or make) splitters for S-Video?? We have installed some plasma screens in a chain of shops, and have run s-video leads from the DVD to the screen. (just one screen per shop) BUT, in the largest shop, they want 3 screens. Any ideas? |
Title: Re: S Video Post by Beanzy on Dec 3rd, 2004, 8:54pm http://custom1.farnell.com/cpc/product.asp?catalog%5Fname=CPC+Catalogue&category%5Fname=Audio+Video+%2D+Audio%2DVideo+Equipment+and+Accessories+%2D+Amplifiers&product%5Fid=AV0947266 That'll do it exactly like you need. |
Title: Re: S Video Post by Lectrician on Dec 4th, 2004, 9:22am No cheap splitters then ;D We ran some composite via splitters is a pub to a few TV's - worked fine ;D |
Title: Re: S Video Post by plugwash on Dec 4th, 2004, 11:53am you could buy the plugs and sockets from farnell or rs and build up a simple splitter hwo well it will work depends on the drive capacity of whats at the source but it may be worth a try you will need to have a steady hand and a small bit for your soldering iron though also you WILL want to get some small heatshrink to stop the joins shorting inside the connectors |
Title: Re: S Video Post by Beanzy on Dec 5th, 2004, 6:04pm Ah I presumed they'd want a decent piccy if they've laid out on the three screens. Cheapo version. You can buy scart to/from Phono and SVideo converters, 3 phono & 1 svid connector switchable to perform in/out. so you just buy a cheap scart splitter and plug the Svideo lead into the converters. You'll find them on CPC or RS.. Have to pack up the kit for tomorrow/tuesday 2dayer so no time to browse yet. |
Title: Re: S Video Post by Lectrician on Dec 5th, 2004, 7:22pm The screens have been delivered, and have an s-video in and out. The constructions say to link them together. |
Ask The Trades » Powered by YaBB 2.3! YaBB © 2000-2008. All Rights Reserved. |