Ask The Trades - Print Page

Ask The Trades
https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl DIY Forum >> Carpentry Questions >> saw blade https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl?num=1104867665 Message started by cupid on Jan 4^th, 2005, 7:41pm

Title: saw blade
Post by cupid on Jan 4^th, 2005, 7:41pm

Can anyone suggest a good blade 216mm 30mm bore for my dewalt mitre saw?,i need a fine tooth one to do skirting/flooring,i relise that dewalt is the way to go but wondering if anyone new of any differant sort.

Title: Re: saw blade
Post by Aquila on Jan 4^th, 2005, 9:44pm

Hi

Trend and CMT both do fine tooth blades in that size

Title: Re: saw blade
Post by woodsmith on Jan 4^th, 2005, 11:07pm

I've got a couple of DeWalt blades for my DW mitre saw and I'm not too impressed.

I recently bought a Freud LPM40M 019 (64 tooth) which is much better but it costs £37.60.

Keith

Title: Re: saw blade
Post by cupid on Jan 5^th, 2005, 12:10am

aquila:many thanks will check them both out,

woodsmith £37.50 does seen a bit pricey compered to others, BUT if they do a better job then it would seem monies well spent. will have a look at these as well thanks for info.

cupid

Title: Re: saw blade
Post by big_all on Jan 5^th, 2005, 1:14am

i have the freid deablo or may be pro blade for my 10" combination saw 60 teeth [£33] it is a dream so smooth cuts
clean in both directions cross cut clean and smooth rip very clean but a bit slow a compromise quicker it cuts the less smooth the edge depends on what you want any blade is a compromise between finish and speed of cut