Ask The Trades - Print Page

Ask The Trades
https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl DIY Forum >> Plumbing Questions >> Wiped joints https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl?num=1112554356 Message started by JohnD on Apr 3^rd, 2005, 7:52pm

Title: Wiped joints
Post by JohnD on Apr 3^rd, 2005, 7:52pm

It is some years since I last wiped a joint, but have one to do, connecting copper pipe to an original lead feed.

Is it o.k. to use modern lead free flux and solder - if not, where do I get the old fashioned, toxic illegal stuff these days??!!

Thanks

JohnD

Title: Re: Wiped joints
Post by thescruff on Apr 4^th, 2005, 12:53am

You mean lead solder, from any plumbers merchants.

Could be illegal to wipe a joint on lead pipe now, other than a repair, you would need to ask the water supplier.

Title: Re: Wiped joints
Post by ian on Apr 4^th, 2005, 6:06am

You can get mechanical fittings for this .Be aware of the lead pipe size though!

Title: Re: Wiped joints
Post by Plumber on Apr 4^th, 2005, 8:23pm

Why not use a Lead Lock.

Title: Re: Wiped joints
Post by JohnD on Apr 5^th, 2005, 2:52pm

I have found some solder in my shed - but is it compatible with modern fluxes?

If not, what should I ask for?

Thanks to those who have responded so far.

JohnD