Ask The Trades
https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl
DIY Forum >> Painting, Decorating & Tiling Questions >> Glossing skirting boards
https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl?num=1159209385

Message started by jimbocam on Sep 25th, 2006, 7:36pm

Title: Glossing skirting boards
Post by jimbocam on Sep 25th, 2006, 7:36pm

What's the best way to gloss skirting boards next to carpet (without pulling up the carpet)?

I end up carefully trying to paint as near as I can to the carpet without touching it but this can leave a noticeable difference between the new paint and the old paint down at carpet level.

Any tips please? :-?

Title: Re: Glossing skirting boards
Post by runninwata on Sep 25th, 2006, 8:50pm

i have stuck a piece of fomica laminate into the space between carpet and skirting then with a deft hand cut right into skirting level, you need to replace the piece of laminate every now and again to prevent ovrspill and runns off of it on to the carpet


regards

steve


Title: Re: Glossing skirting boards
Post by wretch on Sep 25th, 2006, 8:52pm

good wide masking tape.stick it to the carpet with about an 8mm overlap and push it down between the skirting and carpet.it will compress the pile so when it is removed it covers the paint line.it works with hard pile carpets as well.

best regards

wretch

Title: Re: Glossing skirting boards
Post by jimbocam on Sep 26th, 2006, 7:12pm

Cheers both!  :)

Title: Re: Glossing skirting boards
Post by corablimey on Sep 26th, 2006, 8:25pm


wrote on Sep 25th, 2006, 8:52pm:
good wide masking tape.stick it to the carpet with about an 8mm overlap and push it down between the skirting and carpet.it will compress the pile so when it is removed it covers the paint line.it works with hard pile carpets as well.

best regards

wretch



Thats what I do which is fine until they change the carpet down the line, then they get a ridge. ::)

Ask The Trades » Powered by YaBB 2.3!
YaBB © 2000-2008. All Rights Reserved.