Ask The Trades | |
https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl
DIY Forum >> Plumbing Questions >> Wireless thermostat for old oil boiler https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl?num=1233278921 Message started by jonathan280 on Jan 30th, 2009, 1:28am |
Title: Wireless thermostat for old oil boiler Post by jonathan280 on Jan 30th, 2009, 1:28am Hello all, A relative has an old (20yrs+) oil boiler controlled by a mechanical programmer. I'm not sure of the make. I know it's a straight forward "radiators and hot water tank" type system. My relative would like to fit a wireless room thermostat, but has been told that it's only possible to use a "dual channel" type. As I understand it, the old mechanical programmer switches two channels, one for the boiler and one for the C/H pump. Boiler on and pump off gives hot water, boiler on and pump on heats the radiators as well. Have I got this right? Is the advice correct? Can a single channel thermostat be used? If not can anyone suggest a suitable dual channel wireless thermostat? Thanks in advance for any advice. Best regards..........Jonathan |
Title: Re: Wireless thermostat for old oil boiler Post by CWatters on Jan 30th, 2009, 1:39pm I'm not a plumber but, the sort of programmer you need does exist. Here is an example but I've no experience with this make/model.. http://www.cheapboilers.com/thermostat/vaillant/vrt-360-wireless-programmable.htm?ref=base I'm sure it's also possible to use a simple non-programable wireless room stat with a wired dual CH/HW programmer... but perhaps it's better to have all the controls in one place? |
Title: Re: Wireless thermostat for old oil boiler Post by thescruff on Jan 30th, 2009, 6:13pm Without makes and models, it impossible to comment |
Ask The Trades » Powered by YaBB 2.3! YaBB © 2000-2008. All Rights Reserved. |