Ask The Trades | |
https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl
DIY Forum >> Carpentry Questions >> Butterfly drop leaf table https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl?num=1260741545 Message started by mailee on Dec 13th, 2009, 9:59pm |
Title: Butterfly drop leaf table Post by mailee on Dec 13th, 2009, 9:59pm I have been working on this table over the past few months. It is made from Beech with Mahogany inlay and Mahogany pegs for the tennons. The top is made from MR MDF which I veneered with Beech in a radial pattern. The top is lipped with Mahogany to simulate an inlay and then over lipped with Beech. A rule joint is used for the table top. and the whole top was finished with four coats of AC laquer. Worth all the effort I think. |
Title: Re: Butterfly drop leaf table Post by big_all on Dec 14th, 2009, 7:14am brilliant job as always maillee :o :o impressive my man [smiley=thumbsup.gif] [smiley=thumbsup.gif] |
Title: Re: Butterfly drop leaf table Post by woodsmith on Dec 14th, 2009, 7:49am Very nice, now do you get the job to make six matching chairs? ;D |
Title: Re: Butterfly drop leaf table Post by Joiner on Dec 14th, 2009, 8:20am Nice one. [smiley=thumbsup.gif] |
Title: Re: Butterfly drop leaf table Post by Zambezi on Dec 14th, 2009, 4:23pm Lovely job! You have more patience than me!! [smiley=thumbsup.gif] [smiley=thumbsup.gif] |
Title: Re: Butterfly drop leaf table Post by TIMBA-WOLF on Dec 15th, 2009, 12:01am Super Job (except for the plinth with the Ivory inlay!!!) seriously, sweet...(laqy aside... nice actual craftsmanship!!!!!) |
Ask The Trades » Powered by YaBB 2.3! YaBB © 2000-2008. All Rights Reserved. |