Ask The Trades - Print Page

Ask The Trades
https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl DIY Forum >> Plumbing Questions >> Baxi 105e instant https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl?num=1291582046 Message started by bmcc on Dec 5^th, 2010, 8:47pm

Title: Baxi 105e instant
Post by bmcc on Dec 5^th, 2010, 8:47pm

Hi All I have a problem with my Boiler .When i run DWH the radiators get warm, I have done a bit of research and I think the problem is the diverter valve. Has anyone any info on stripping one I had trouble with grit in the smaller valve and also replaced the diaphram, so I would like to try and clean out the diverter valve before going down the line of a complete replacement
Cheers
Bill

Title: Re: Baxi 105e instant
Post by thescruff on Dec 6^th, 2010, 12:16am

You just take it to bits, remembering where it all goes.

If there's grit in the system it should be cleaned/flushed.

Title: Re: Baxi 105e instant
Post by bmcc on Dec 6^th, 2010, 3:59pm

Thank you scruff .Will start tomorrow when i have plenty of time.
Bill
;)

Title: Re: Baxi 105e instant
Post by greg on Dec 11^th, 2010, 8:02pm

I think you can get diaphragm for the 105, no need to change whole valve