Ask The Trades | |
https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl
DIY Forum >> Alarms, Phones, Aerials, CCTV & Datacomms >> Texacom Veritas VR8 Entry time https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl?num=1300492245 Message started by GJAMES on Mar 18th, 2011, 11:50pm |
Title: Texacom Veritas VR8 Entry time Post by GJAMES on Mar 18th, 2011, 11:50pm Is it possible to change the amount of time on this unit from the first contact opening in the EE zone and the alarm activating the siren and strobe? I'd like to reduce that time. Many thanks. |
Title: Re: Texacom Veritas VR8 Entry time Post by Lectrician on Mar 19th, 2011, 7:35am Yes, but you would need to know what the engineer code has been set to. Do you have this? If you do not have the engineer code, the panel would need to be defaulted back to the factory settings which would then mean re-programming everything. |
Ask The Trades » Powered by YaBB 2.3! YaBB © 2000-2008. All Rights Reserved. |