Ask The Trades | |
https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl
DIY Forum >> Plumbing Questions >> Flush valves https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl?num=1404602186 Message started by CWatters on Jul 6th, 2014, 12:16am |
Title: Flush valves Post by CWatters on Jul 6th, 2014, 12:16am Anyone know if the Fluidmaster flush valve... http://www.screwfix.com/p/fluidmaster-lever-dual-flush-valve/57025 can be used with a standard handle? I have a nice ceramic handle on a square shaft I'd like to retain. |
Title: Re: Flush valves Post by thescruff on Jul 6th, 2014, 12:57am Not usually CW, they are press button for large or small flush |
Title: Re: Flush valves Post by CWatters on Jul 6th, 2014, 10:38am Pity. Might have to go for a flapper type flush valve as it's proving difficult to find something that will fit in my cistern alongside a decent fill valve. |
Title: Re: Flush valves Post by thescruff on Jul 6th, 2014, 10:45am Have a look at the Fluidmaster Pro 750UK. It comes with a lever that goes up or down depending on the full or half flush, I doubt it will work with your handle but maybe worth a try. |
Title: Re: Flush valves Post by CWatters on Jul 6th, 2014, 11:43am Problem sorted. Looks like the Fluidmaster fill valve will just about fit in alongside the existing syphon. |
Ask The Trades » Powered by YaBB 2.3! YaBB © 2000-2008. All Rights Reserved. |