Ask The Trades | |
https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl
DIY Forum >> Electrical Questions >> Hot tub wiring 32amp https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl?num=1405071126 Message started by Plocke on Jul 11th, 2014, 10:32am |
Title: Hot tub wiring 32amp Post by Plocke on Jul 11th, 2014, 10:32am Hi I need a hot tub wiring with a 45-50m run from rcd to rotary isolator switch. Can someone just confirm that 6mm swa 3 core armoured cable is ok and that it can be cleated all around fence to get it to hot tub also anyone know a rough price to just connect to rcd box and rotary isolator switch for me as plan on buying and running cable myself to cut costs many thanks |
Title: Re: Hot tub wiring 32amp Post by Lectrician on Jul 11th, 2014, 4:30pm 6mm² is OK (just) at 50m, using a 5% volt drop. Interestingly, if you went to the 16th edition of the regs (the last one just gone), you had a 4% max volt drop, and this would of meant upping the cable to 10mm² for 50m. You can drop a maximum of 3% for lighting and 5% for everything else. IF you have no lighting on that cable run (I don't see underwater lighting as counting), then 5% is the max. You could only run around 30m at 32amp with a 3% volt drop. Prices vary across the country. You would need to allow approx £250-£300 including materials I guess. Your electrician will likely want to be upgrading your main protective bonding too if this is not up to the required size. |
Ask The Trades » Powered by YaBB 2.3! YaBB © 2000-2008. All Rights Reserved. |