Ask The Trades - Print Page

Ask The Trades
https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl DIY Forum >> Plumbing Questions >> volkera sabre 29he https://www.askthetrades.co.uk/cgi-bin/yabb/YaBB.pl?num=1413413046 Message started by saab on Oct 15^th, 2014, 11:44pm

Title: volkera sabre 29he
Post by saab on Oct 15^th, 2014, 11:44pm

hi all,

can anyone tell me if I need to remove the pump and condensate trap to replace the dhw heat exchanger, or is it possible to do without

thanks in advance

Title: Re: volkera sabre 29he
Post by thescruff on Oct 15^th, 2014, 11:52pm

Hi it may be possible to do it without if you have the right kit but normal would be to remove the pump and condensate trap.

On a side note, you should be getting an RGI to do this.

Intructions are in the manual, let me know if you don't have the manual

Title: Re: volkera sabre 29he
Post by saab on Oct 16^th, 2014, 12:05am

thanks for the reply

I like how the manual stated maybe lol!!

im a self employed spark by trade for over 30yrs work away a lot alongside a plumbing company, so we help each other out a lot as we both know each others work ;).....unfortunately he's still away till end of month (sods law really)

wasa thinking on leaving it till then but got the bits so was going to do weekend

problem I got is the pressure is at just under 3bar the prv is keeping it at this as it is leaking, the pv has 1 bar in it so don't suspect this and when not calling for ch or hw pressure goes up unless I turn of the cw supply