Ask The Trades - Toilet pan screws....

Welcome, Guest. Please Login or Register

	May 17^th, 2024, 3:49am
View recently thanked users View top thanked users

Quote: A rock --> me <-- A hard place

(Moderator: thescruff) - (Moderator Group: Board Moderator)

Pages: 1

Toilet pan screws.... (Read 2466 times)

wotamess GDPR opt-out	Toilet pan screws.... Sep 29^th, 2005, 8:57am Daft question but, can anyone advise what's the best way to secure the pan to the floor and what with? The pan has two holes about 11mm dia...which seems to be too big to take a normal sized screw head...and also I seem to remember plumbers cuttind small round washers out of lead to protect the glaze. Are there any special screws/caps available?
Back to top	IP Logged

big_all Global Moderator Trade Member Author Offline heeelllooo Posts: 5596 Total Thanks: 10 For This Post: 0 Gender: Trade: Joiner	Re: Toilet pan screws.... Reply #1 - Sep 29^th, 2005, 11:30am plumbers merchants no 12 or 14 brass use a tap washer [one with a hole in it:
Back to top	« Last Edit: Sep 29^th, 2005, 11:32am by big_all » big all --------------- we are all still learning IP Logged

jasonB GDPR opt-out Total Thanks: 10 For This Post: 0	Re: Toilet pan screws.... Reply #2 - Sep 29^th, 2005, 4:52pm Fisher make a set that come with grommets to protect the pan & large white screw caps. Should be ble to get them from a plumbers merchant or Screwfix do the No 43370. Jason
Back to top	IP Logged

Pages: 1

(Moderator: thescruff) - (Moderator Group: Board Moderator)